Interior doors Online

RON HAZELTON:
Well, i have got the pickup headed west towards the tiny farming community of Tissora, South Carolina. I am to my method to see Karen Harper as soon as I state she life in the country, really, [LAUGHS] which is just what after all.
[RON KNOCKS ON DOOR]
Hey, Karen.
KAREN HARPER:
Hey, Ron.
RON HAZELTON:
How are you currently?
KAREN HARPER:
Good to see you.
RON HAZELTON:
We are sort of on a farm here, are not we?
KAREN HARPER:
We yes are.
RON HAZELTON:
I just saw some bulls online in the front yard.
KAREN HARPER:
That's right. [LAUGHS] That's right - the household farm surrounds united states.
RON HAZELTON:
Wow. Karen Harper's been hard at your workplace, repainting and wallpapering the woman family's ranch-style home. The woman next project is to change those basic hollow core bedroom doors with anything bigger and better searching.

So you want to just take this down and replace it with a panel door.
KAREN HARPER:
Right.
RON HAZELTON:
Okay.

The old door comes down quickly with a few taps from the hinge pins from Karen and slightly added assistance from me.

Pull it away. There we get.

Then we head outside with the old door. We eliminate each of its equipment, then lay it along with Karen's new pine panel home.

Now since the old door fit just fine, we're going to utilize it as a template to cut the hinged mortises and bore for lock set on our new door. So let's only get everything prearranged there. Will you be flush?
KAREN HARPER:
I am flush quietly.
RON HAZELTON:
Okay, good, okay.

When the two doorways tend to be clamped firmly together, we start transferring the hinge locations.

So we'll start off by taking the mixture square, laying it directly on the side. Then rather than utilizing a pencil, i'll utilize a knife here. It offers me a much sharper range. While you'll see later on, it offers me personally in fact a location setting the chisel.

After establishing the edges regarding the hinge mortise, i personally use the blend square again to scribe a line over the bottom. Okay, let’s set this down here.
[SOT]
We are about to start marking the contrary part when it comes to latch set whenever we discover a tiny problem. As you can see, our brand new home's a little bit broader compared to old one, so I desire to take several of this off while making all of them both same width.

I could utilize a hand plane to accomplish this but this can be likely to be faster. This can be a small energy airplane. Several passes is all it must just take. We have to take-off, oh, only an eighth of an inch. Today it is a hole saw. This is just what we're going to use to cut fully out this big gap here for the latch cylinder.

And weare going to utilize the old home once more, as a template, so we know precisely in which the opening goes. But also the thickness for this door helps keep this drill straight. I wish to stop when the pilot exercise comes through opposite side regarding the door.

Thus I'll view down here then we'll let you know when you should end. [DRILLING NOISES] Push down slightly harder, somewhat more. Push a bit more. End. Take it out.

We flip the doorways over and making use of the little pilot opening as helpful information – ok, therefore great and straight - continue drilling from the opposite side. This creates clean edges on both sides of this hole.
[SOT]
From right here in, most our work may be regarding home's advantage. We've come up with some short-term clamping jigs to carry the door in a vertical place. That will can be found in specially handy today. Karen makes use of a spade little bit to bore the latch bolt hole. It should be perfectly straight. So once more, we use the combination square as helpful tips.

After that, we screw the latch bolt in position briefly and scribe around the outside the plate. Today, it's the perfect time for some chiseling. We will very first must cut the side of the mortise. That blade mark we made early in the day now provides a shallow V into which we could set the chisel knife, giving united states better accuracy than an easy pen range would.

Today a chisel features two sides. This is actually the bevel right here, which may be the level side. So always take the product out-by putting the bevel straight down like this. Aided by the latch bolt mortise total, we turn our attention to the hinge mortises.

Now at this point, we are getting real close, therefore we may take the chisel and align it aided by the - the bevel up, this part of it level on right here and - and we also can style of - can style of pare a little bit of this off and get this actually level under here.

Flat. So now you're not, you aren't digging in today, you are simply - you're only leveling it off, you're flattening it well, so make certain you ensure that is stays flat.

Our precise tagging and cautious chiseling pay back therefore the hinges fit perfectly.
KAREN HARPER:
Oh, those are quite.
RON HAZELTON:
While we install the doorknob set, Karen's inside, screwing on brand-new hinges. Appear only a little bit….
[SOT]
Well, it is the right time to hang the doorway. The hinge knuckles line up completely. In accordance with various taps on pins, our home dangling project is complete.

Would like to try it? Understand latches? Well, it sounds great.
KAREN HARPER:
Yes, it is perfect.
RON HAZELTON:
You happy with it?
KAREN HARPER:
Oh, yes.
RON HAZELTON:
So now you've got a couple more of these to do. I'm going to supply this chisel regarding my toolbox and I also'll hone it before I-go.

KAREN HARPER:
Okay, thanks.
RON HAZELTON:
And - but I hope might give it an attempt because i do believe you could do it.
KAREN HARPER: